Kılavuz çekme matkap çapı hesaplama
Bu sayfa, yaygın talaşlı imalat formülleri ve mühendislik tahmin mantığıyla kılavuz matkap çapı hesaplayıcı hesaplar.
✓ Tarayıcıda hesaplama↔ Metrik ve inçƒ Formül görünür
01
İşleme verilerini girin
Varsayılan değerler örnektir. Gerçek kurulum verileriyle değiştirin.
03
Formül ve teknik notlar
Formül / mantık
Cutting tap: TD = D − Hp×P/76.98 for metric, or TD = D − Hp/(76.98×TPI) for inch vidas. Forming tap approximation: TD = D − Hp×P/147.06 for metric, or TD = D − 0.0068×Hp/TPI for inch vidas. Always verify with the tap manufacturer and vida class.
Cutting tap: TD = D − Hp×P/76.98 for metric, or TD = D − Hp/(76.98×TPI) for inch vidas. Forming tap approximation: TD = D − Hp×P/147.06 for metric, or TD = D − 0.0068×Hp/TPI for inch vidas. Always verify with the tap manufacturer and vida class.
Mühendislik notu: Bu araçlar tahmin ve planlama içindir. Üretim değerlerini takım katalogları, makine sınırları, malzeme verileri ve ilgili standartlarla doğrulayın.
Sık sorulan sorular
Can this result be used directly on a CNC machine?
Use it as a starting value only. Check the tool manufacturer data, machine limits, workholding, coolant and material condition before production.
Which units does the calculator support?
The calculator shows the units beside each input. Select metric or inch units where the page provides a unit-system control.
Why can shop results differ from the calculation?
Tool geometry, coating, runout, rigidity, chip evacuation, material hardness and machine power can change the practical result.