铣螺纹 G-code 生成器
用于估算和计算「铣螺纹 G-code 生成器」，适合加工工艺初算、参数对比和方案规划。
✓ 浏览器本地计算↔ 公制与英制ƒ 显示计算公式
01
输入加工数据
默认值仅为示例，请替换为实际加工数据。
03
公式与工程说明
公式 / 逻辑
Helical interpolation: one 360° circular interpolation moves one pitch in Z. Internal thread cutter-center radius = (thread major diameter − tool diameter)/2; external thread cutter-center radius = (thread major diameter + tool diameter)/2. Verify controller syntax before machining.
Helical interpolation: one 360° circular interpolation moves one pitch in Z. Internal thread cutter-center radius = (thread major diameter − tool diameter)/2; external thread cutter-center radius = (thread major diameter + tool diameter)/2. Verify controller syntax before machining.
工程提示：这些工具用于估算和方案规划。生产参数需结合刀具样本、机床限制、材料数据和适用标准复核。
常见问题
Can this result be used directly on a CNC machine?
Use it as a starting value only. Check the tool manufacturer data, machine limits, workholding, coolant and material condition before production.
Which units does the calculator support?
The calculator shows the units beside each input. Select metric or inch units where the page provides a unit-system control.
Why can shop results differ from the calculation?
Tool geometry, coating, runout, rigidity, chip evacuation, material hardness and machine power can change the practical result.